My home has a floor heating system on the main floor, which basically has a pump that normally runs 24/7 and has no smart controls or connectivity. If hot water comes from the Central Heating, it’ll heat the floor, otherwise it’ll cool it.
I wanted to save on;
- not having the pump running at all times (~35€ / year savings)
- not heating the floor when ONLY heating other rooms in the house , like upstairs in the evening/morning (~110€/year savings)
All rooms in my house have a Tado smart thermostat which measures the temperature and humidity, and which can turn on the Central Heating unit if temperatures drop below a preset value. Using a Tado in your home and if have a ‘dumb’ pump like me, you could automate and save a lot of money 🙂 Kitlist:
First, set up your Pi Zero so it has connectivity (same subnet as the Hue Bridge, and outbound internet access), and install Python3 on it.
Then set up your Hue Bridge and ensure the Hue Smart Plug shows up in your Hue app.
Put the Smart Plug in between your wall outlet and the Floor Heating pump:
Create a Hue API username and determine the plug’s ID
Create a Tado account and set up a heating profile for the room. If you don’t have an old radiator in the room, just plug it onto another one to set it up, then remove it and place it somewhere in the kitchen to make it think it is controlling a radiator, as these plugs are actually mechanical and meant to rotate:
Customize my script and run! I scheduled it to run every minute using a cronjob on the pi.
Since we already had Tado and Hue, the total cost of the project was only 35€ (raspberry pi + smart plug), so the investment was well worth it.
Get the code at my git lab or below:
Git lab Tado Floor Heating Pump Controller with Philips Hue Smart Plug
import requests
import json
import os
import datetime
import time
data = {'grant_type':'password',
'scope':'home.user',
'client_id':'tado-web-app',
'client_secret':'wZaRN7rpjn3FoNyF5IFuxg9uMzYJcvOoQ8QWiIqS3hfk6gLhVlG57j5YNoZL2Rtc', #see https://shkspr.mobi/blog/2019/02/tado-api-guide-updated-for-2019/ on how to get this client secret
'username':'Test@test.com', #your tado login/email
'password':'MyPassword' #your tado password
}
hueBaseURL = "http://HUEBRIDGEIPHERE/api/USERNAMEHERE" #the IP and username of your HUE, see https://github.com/tigoe/hue-control for instructions on how to get the username
hueLightID = '6' #the ID of the Hue Power Plug in which you connected your floor heating pump, see https://github.com/tigoe/hue-control for instructions on how to get all ID's
tadoHomeId = '12345' #the home ID of your tado account, see https://shkspr.mobi/blog/2019/02/tado-api-guide-updated-for-2019/ on how to get the ID
tadoHeatingZoneId = '6' #the ID of the tado zone you are heating using a floor heating system, see https://shkspr.mobi/blog/2019/02/tado-api-guide-updated-for-2019/ on how to get the ID
r = requests.post('https://auth.tado.com/oauth/token', data = data)
j = json.loads(r.text)
TOKEN = j["access_token"]
headers={'Authorization': "Bearer " + TOKEN}
r = requests.get('https://my.tado.com/api/v2/homes/'+tadoHomeId+'/zones/'+tadoHeatingZoneId+'/state', headers=headers)
j = json.loads(r.text)
desiredTemp = j["setting"]["temperature"]["celsius"]
currentTemp = j["sensorDataPoints"]["insideTemperature"]["celsius"]
currentPower = j["activityDataPoints"]["heatingPower"]["percentage"]
print("Status zone "+tadoHeatingZoneId+" : "+str(j["setting"]["power"]))
print("Heating power for zone "+tadoHeatingZoneId+" : "+str(currentPower)+"%")
print("Current temperature in zone "+tadoHeatingZoneId+" : "+str(currentTemp))
print("Target temp in zone "+tadoHeatingZoneId+" : "+str(desiredTemp))
r = requests.get(hueBaseURL+'/lights/'+hueLightID)
j = json.loads(r.text)
pumpState = j["state"]["on"]
print("Floor heating pump state: "+str(pumpState))
if currentPower > 0 and pumpState == False :
print("PUMP SHOULD BE TURNED ON")
r = requests.put(hueBaseURL+'/lights/'+hueLightID+'/state', data = '{"on":true}')
print(r.content)
print("PUMP TURNED ON")
elif currentPower <= 0 and pumpState == True :
print("PUMP SHOULD BE OFF")
r = requests.put(hueBaseURL+'/lights/'+hueLightID+'/state', data = '{"on":false}')
print(r.content)
print("PUMP TURNED OFF")
Thanks for providing this script. Got it to run on my Synology NAS and tweaked it a bit to check the heating power status for both my thermostats. First time ever I did anything with Python 🙂
Thanks for the article! I achived the same goal but in a different way. I have a thermostat installed in the floor heating room, so no need to use a fake radiator knob. Both Tado and Hue works with Homekit, so I created two Homekit automations (using the Home+ app) to (1) turn on the Hue plug when the thermostat’s “current heating cooling state” is “heat”, and (2) turn off the Hue plug when the thermostat’s “current heating cooling state” is “off”. From my test the delay is quite short, the plug turns on the pump within 10 seconds when… Read more »